Hasselblad L1D-20c (Mavic 2 Pro)

The Hasselblad L1D-20c is factory installed on the Mavic 2 Pro and features a high quality 1" CMOS sensor suitable for ortho-mapping and structure from motion.

The L1D-20c provides a fully integrated, simple to use, camera system for the Mavic 2 Pro. It takes good quality stills and excellent 4K video, and can also be used as a basic and highly portable photogrammetry tool. 

 

Sensor1” CMOS Effective Pixels: 20 million
LensFOV: about 77° 35 mm Format Equivalent: 28 mm Aperture: f/2.8–f/11 Shooting Range: 1 m to ∞
ISO RangeVideo: 100-6400 Photo: 100-3200 (auto) 100-12800 (manual)
Shutter SpeedElectronic Shutter: 8–1/8000s
Still Image Size5472×3648
Still Photography ModesSingle shot Burst shooting: 3/5 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias Interval (JPEG: 2/3/5/7/10/15/20/30/60s RAW:5/7/10/15/20/30/60s)
Video Resolution4K: 3840×2160 24/25/30p 2.7K: 2688x1512 24/25/30/48/50/60p FHD: 1920×1080 24/25/30/48/50/60/120p
Max Video Bitrate100Mbps
Color ModeDlog-M (10bit), support HDR video (HLG 10bit)
Supported File SystemFAT32 (≤ 32 GB) exFAT (> 32 GB)
Photo FormatJPEG / DNG (RAW)
Video FormatMP4 / MOV (MPEG-4 AVC/H.264, HEVC/H.265)

The L1D-20c is built into the Mavic 2 Pro and cannot be removed for other use.


With have 3 x Mavic 2 Pro aircraft with L1D-20c available.


This article was published on