OxTS RT3003 INS/DGPS

The RT3003 provides high accuracy GPS positioning alongside very precise attitude data.

The RT3003 INS/DGPS is installed on the ECO-Dimona as part of the Navigation-Alignment System (NAS). The unit is rigidly mounted within the NAS alignment block, where it is co-aligned with the LD90 laser altimeter as well as the hyperspectral imaging system and the camera system.

 

General Specifications:

Postioning:  L1/L2 Kinematic

Positioning Accuracy:  1.5m CEP SPS;  0.8m CEP SBAS; 2cm 1σ

Velocity Accuracy: 0.05 kh/h RMS

Acceleration:

    - Bias:  10 mm/s2 1σ

    - Linearity:  0.01%

    - Sacle factor: 0.1% 1σ

    - Range 100 m/s2

Roll / Pitch: 0.03 degrees 1σ

Heading: 0.1 degrees 1σ

Udpate Rate: 100 Hz

Weight: 2.4 kg

Operating temperature: -10C to +50C

For more detailed specifications see the RT3003 manual.


The RT3003 is fully integrated ion the ECO-Dimona's EF19B sensor package, and not currently available for wider use.


We have one RT3003 unit.


This article was published on