The DJI-Zenmuse P1 is a 45Mp full-frame camera for the Matrice 300 RTK drone. The P1 provides an exceptionally powerful mapping and 3D imaging tool for the M300 RTK drone system. It is specifically designed for photogrammetry and is fully supported by advanced flight planning and data acquisition modes which greatly improve the quality and efficiency of mapping and 3D imaging tasks. We currently operate the P1 with a 35 mm prime lens for great all-round performance, but other lenses are available and may suite specific tasks. Specifications Physical and environmental: Dimensions: 198×166×129 mm Weight: Approx. 800 g IP Rating: IP4X Operating Temperature Range: -20° to 50° C (-4° to 122° F) Storage Temperature Range: -20° to 60° C (-4° to 140° F) Camera: Sensor size (Still): 35.9×24 mm (Full frame) Sensor size (Max video recording area): 34×19 mm Effective Pixels: 45MP Pixel size: 4.4 μm Supported Lenses: DJI DL 24mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 84°; DJI DL 35mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 63.5°; DJI DL 50mm F2.8 LS ASPH (with lens hood and balancing ring/filter), FOV 46.8° Photo Size: 3:2 (8192×5460) Minimum photo interval: 0.7 s Mechanical Shutter Speed: 1/2000*-1 s; Electronic Shutter Speed: 1/8000-1 s *Aperature value no larger than f/5.6 Aperture Range: f/2.8-f/16 ISO Range: Photo: 100-25600; Video: 100-25600 Platform Compatibility The P1 is designed for and only compatible with the Matrice 300 RTK drone. Availability We have one P1 camera available. This article was published on 2024-06-25
